Replacing The Ocp Module - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
Installing the OCP dummy cover
Figure 100: Installing the OCP dummy cover
▶ Place the OCP dummy cover with the guiding pin onto the OCP slot (1).
▶ Close the OCP dummy cover.
▶ Fasten the knurled screw (2).
Concluding steps
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
9.5.4

Replacing the OCP module

Field Replaceable Unit
(FRU)
Tools:
tool-less
MAC addresses are stored on OCP module itself. When replacing OCP
module, MAC addresses are changed. Inform the customer about these
new MAC addresses. MAC addresses will not be changed by replacing
the system board.
192
59.
60.
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX4770 M6