Looking For The Wwn Address Of A Fibre Channel Controller - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Basic software procedures
Using the iRMC S5 web interface
▶ Log in to the iRMC S5 web interface.
▶ Open the System menu.
▶ Open the Network page.
▶ In the Network Adapters group, you will find detailed information on each
network controller in the managed PRIMERGY server, including its MAC
address.
This information is only available with the iRMC S5 or above. Only
network controllers supporting the Command Line Protocol (CLP) will
be displayed.
For add-in cards the vendors provide documentation and tools,
offered on the Fujitsu support web pages:
https://ts.fujitsu.com/support/
Select the server, select Downloads - More Details - Driver. Some
vendors bundle the documentation together with the driver package.
5.3.15.3

Looking for the WWN address of a fibre channel controller

There are several possible locations where these addresses can be found.
▶ Inform the customer about the new or changed WWN address.
Checking the label
▶ If available, check the label on the controller. Beside the part number, you
may find the WWN address.
Using the BIOS
▶ Enter the BIOS setup menu.
▶ Select the Configuration menu.
108 Upgrade and Maintenance Manual RX4770 M6