Omron E5 C Series Manual page 71

Dimensions
Controllers
E5DC
The above figure shows the
Terminal Unit attached to
the Main Unit.
E5DC-B
The above figure shows the
Push-In Plus Terminal Unit
attached to the Main Unit.
4
22.5
96
Mounting Adapter
(Y92F-53)(Order separately)
(6.5) 4
22.5
96
Mounting Adapter
(Y92F-53)(Order separately)
• Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the Digital Temperature
Controller. The E58-CIFQ2 USB-Serial Conversion Cable is required to connect to the port on the bottom panel. The
E58-CIFQ2 USB-Serial Conversion Cable and E58-CIFQ2-E Communications Conversion Cable are required to con-
nect to the port on the front panel. (You cannot leave either port connected constantly during operation.)
Mounted Separately Two-Unit Mounting
+0.3
22.7
0
+0.8
+0.8
92
92
0
0
120 min
• Recommended panel thickness is 1 to 8 mm.
• Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.)
• When two or more Digital Temperature Controllers are mounted, make sure that the surrounding temperature does
not exceed the allowable operating temperature specified in the specifications.
(85)
81
+1.15
90
-0.2
90
110
35
4
Terminal Unit (E5DC-SCT1S)
(90)
86
+1.15
90
-0.2
110
35
+1.15
90
-0.2
4
Push-In Plus Terminal Unit
(E5DC-SCT1B)
Group Mounted
(22.5 × number of units)
+0.6
45
0
+0.8
92
0
E5DC/E5DC-B
(Unit: mm)
22.5
+1.15
-0.2
(6.5)
22.5
+1.0
0
71