Omron E5 C Series Manual page 22

E5CC/E5CC-B/E5CC-U
Optional Products (Order Separately)
USB-Serial Conversion Cable
Model
E58-CIFQ2
Terminal Covers (for E5CC)
Model
E53-COV17
E53-COV23 (3pcs)
Note: The E53-COV10 cannot be used.
Refer to page 33 for the mounted dimensions.
Waterproof Packing
Model
Y92S-P8
Note: The Waterproof Packing is provided only with E5CC/E5CC-B
Controllers.
The E5CC-U cannot be waterproofed even if the Waterproof
Packing is attached.
Current Transformers (CTs)
Hole diameter
5.8 mm E54-CT1
E54-CT1L *
5.8 mm
12.0 mm E54-CT3
E54-CT3L *
12.0 mm
＊Lead wires are included with these CTs. If UL certification is required, use
these CTs.
Adapter
Model
Y92F-45
Note: Use this Adapter when the panel has already been prepared for
an E5B@ Controller.
Waterproof Cover
Model
Y92A-48N
Mounting Adapter
Model
Y92F-49
Note: This Mounting Adapter is provided with the Digital Temperature
Controller.
DIN Track Mounting Adapter (for E5CC)
Model
Y92F-52
Sockets (for E5CC-U)
Type
Front-connecting Socket
Front-connecting Socket with Finger Protection
Back-connecting Socket
Terminal Cover for Back-connecting socket
with Finger Protection
22
Model
Model
P2CF-11
P2CF-11-E
P3GA-11
Y92A-48G
Front Covers
Type
Hard Front Cover
Soft Front Cover
CX-Thermo Support Software
Model
EST2-2C-MV4
Note: CX-Thermo version 4.5 or higher is required for the E5CC.
CX-Thermo version 4.61 or higher is required for the E5CC-U.
CX-Thermo version 4.65 or higher is required for the E5CC-B.
CX-Thermo version 4.67 or higher is required for the E5CC-B
linear current output type.
For the system requirements for the CX-Thermo, refer to
information on the EST2-2C-MV4 on the OMRON website
(www.ia.omron.com).
Model
Y92A-48H
Y92A-48D