Omron E5 C Series Manual page 108

E5EC-T/E5AC-T
Dimensions
Controllers
E5EC-T
Mounted Separately
120 min.
• Recommended panel thickness is 1 to 8 mm.
• Group mounting is not possible in the vertical direction. (Maintain the
specified mounting space between Controllers.)
• To mount the Controller so that it is waterproof, insert the waterproof
packing onto the Controller.
• When two or more Controllers are mounted, make sure that the sur-
rounding temperature does not exceed the allowable operating tem-
perature specified in the specifications.
108
4
48 1
96
Waterproof Packing Mounting Adapter
(Accessory, Y92S-P9 (Accessory, Y92F-51
(also available for (also available for
ordering separately)) ordering separately))
Group Mounted *
(48 × number of units − 2.5)
+0.6
45
0
+0.8
92
0
Group mounting does not
allow waterproofing.
-0.8
92
0
(64)
60
44
110
* Selections for Control Outputs 1 and 2: QQ, QR, RR, CC, PR, or CQ
+1.0
0
If you also specify 019, 021, 022 for the option selection and use
group mounting, the ambient temperature must be 45°C or less.
Maintain the following spacing when more than one Digital
Controller is installed at an ambient temperature of 55°C.
120 min.
• Setup Tool ports are provided as
standard feature. Use these ports to
connect a computer to the Digital
Temperature Controller. The E58-
CIFQ2 USB-Serial Conversion Cable
is required to connect to the port on
the top panel. The E58-CIFQ2 USB-
Serial Conversion Cable and E58-
91
CIFQ2-E Communications
Conversion Cable are required to
connect to the port on the front panel.
(You cannot leave either port
connected constantly during
operation.)
60 min.
-0.6
45
0
+0.8
92
0
(Unit: mm)