Omron E5 C Series Manual page 53

Dimensions
Controllers
E5EC
E5EC-B
• Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the Digital Temperature Controller. The E58-
CIFQ2 USB-Serial Conversion Cable is required to connect to the port on the top panel. The E58-CIFQ2 USB-Serial Conversion Cable and
E58-CIFQ2-E Communications Conversion Cable are required to connect to the port on the front panel. (You cannot leave either port
connected constantly during operation.)
Mounted Separately
+0.6
45
0
120 min.
• Recommended panel thickness is 1 to 8 mm.
• Group mounting is not possible in the vertical direction. (Maintain the
specified mounting space between Controllers.)
• To mount the Controller so that it is waterproof, insert the waterproof
packing onto the Controller.
• When two or more Controllers are mounted, make sure that the sur-
rounding temperature does not exceed the allowable operating tem-
perature specified in the specifications.
4
48
1
96
Waterproof Packing
(Accessory, Y92S-P9 Mounting Adapter
(also available for (Accessory, Y92F-51
ordering separately)) (also available for
ordering separately))
4
(1)
48
96
Mounting Adapter
Waterproof Packing
(Accessory, Y92S-P9 (Accessory, Y92F-51
(also available for (also available for
ordering separately)) ordering separately))
Group Mounted *
+1.0
(48 × number of units − 2.5)
0
+0.8
92
0
Group mounting does not
allow waterproofing.
-0.8
92
0
(64)
60
44
110
(71.4)
67.4
44
110
* E5EC:
Selections for Control Outputs 1 and 2: QQ, QR, RR, CC, PR, or CQ
If you also specify 011, 013, or 014 for the option selection and use
group mounting, the ambient temperature must be 45°C or less.
Maintain the following spacing when more than one Digital
Controller is installed at an ambient temperature of 55°C.
-0.6
45
0
120 min.
E5EC/E5EC-B/E5AC
91
91
60 min.
+0.8
92
0
(Unit: mm)
53