Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
M.2 2230 solid-state
6. Remove the
M.2 2280 solid-state
7. Remove the
hard
drive.
8. Remove the fan.
9. Remove the
wireless
card.
10. Remove the
display
assembly.
11. Remove the touchpad.
12. Remove the speakers.
13. Remove the
IO
board.
14. Remove the
power
button.
15. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
16. Remove the
power-adapter
About this task
The following images indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
Steps
After performing the pre-requisites you are left with the palm-rest and keyboard assembly.
Before working inside your
drive.
drive.
port.
computer.
Disassembly and reassembly
67