Table of Contents
Advertisement
Steps
1. Adhere the camera module in its slot on the display assembly.
2. Connect the camera cable to the camera module.
Next steps
1. Install the
display
bezel.
2. Install the
display
panel.
3. Install the
display
assembly.
4. Install the
wireless
card.
5. Install the
base
cover.
6. Install the
SD
card.
7. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
About this task
The following images indicate the location of the touchpad and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
57
Advertisement
Table of Contents
