Installing The Power-Adapter Port - Dell Vostro 3405 Service Manual

Installing the power-adapter port

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the power-adapter port and provides a visual representation of the installation
procedure.
Steps
Place the power-adapter port into its slot on the palm-rest and keyboard assembly.
Next steps
1. Install the system board
2. Install the display assembly.
3. Install the wireless card.
4. Install the fan.
5. Install the M.2 2230 solid-state
6. Install the M.2 2280 solid-state
7. Install the battery.
8. Install the base cover.
9. Install the SD card.
10. Follow the procedure in
66 Disassembly and reassembly
drive.
drive.
After working inside your computer.