Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
M.2 2230 solid-state
6. Remove the
M.2 2280 solid-state
7. Remove the
memory
modules.
8. Remove the fan.
9. Remove the
heat
sink.
10. Remove the
wireless
card.
11. Remove the
display
assembly.
About this task
The following images indicate the location of the system board and provides a visual representation of the removal procedure.
60
Disassembly and reassembly
After working inside your
Before working inside your
drive.
drive.
computer.
computer.