Table of Contents
Advertisement
About this task
The following images indicate the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Steps
1. Place the coin-cell battery into the coin-cell battery holder on the I/O board with the plus sign facing up.
2. Press down on the coin-cell battery to lock it in place in the coin-cell battery holder.
Next steps
1. Install the
IO
board.
2. Reconnect the battery.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
Hard drive
Removing the hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the battery.
About this task
The following images indicate the location of the hard drive and provides a visual representation of the removal procedure.
32
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
