Remote Receive Code; Silence Detection Time; Automatic Turnaround Polling - Samsung SF5500 Installation And Operation Manual

REMOTE RCV CODE?
[ 0-9 ] >
SILENCE DETECT.
TIME ? (UNLIMIT : N)
AUTO TURNAROUND
POLLING ?
TURNAROUND
POLL CODE=0000
SAMSUNG ELECTRONICS CO., LTD

Remote Receive Code

(Used with Extension Telephone)
(*2*)
If you use an extension telephone which is connected to the fax
machine (see page 1-14), you can control the fax machine to begin
receiving a fax by entering a remote receive code on the extension
telephone.
The code is made up of * 2 *. The first and the last * are fixed, but
you can change the middle digit from 0 to 9. Enter the desir e d
number, then press YES.
For more information on "Receiving Using an Extension
Telephone" , see page 4-28

Silence Detection Time

(Used in ANS/FAX mode only)
In ANS/FAX mode, after a call is picked up by the answering
machine, your fax machine monitors the line.
When your fax machine detects a certain time period of silence or
that the line has been released by the answering machine, the call
will be treated as a fax message and your machine can begin to
receive a fax.
You can limit the silence detection time to 12 seconds or select
unlimited time.
Press YES if you want to limit the time to 12 seconds.
Press No if you want to select unlimited silence detection time.

Automatic Turnaround Polling

You can set your fax machine to turnaround poll another machine.
(N)
Press YES to poll a remote machine everytime you send documents
to the remote machine. For more information on "Tu r n a ro u n d
Polling", see page 4-15.
Press NO if you do not want turnaround polling
If you have selected turnaround polling, the fax machine prompts
you to enter a 4-digit turnaround poll code. This code is required to
access a remote fax machine secured with a poll code.
2 - 9