Clearing Memory - Samsung SF5500 Installation And Operation Manual

CLEARING MEMORY

RINGER, TONER OR
SYSTEM SETUP? Y/N
NEW TONER UNIT ?
MEMORY CLEAR ?
TX & RX JOURNAL
CLEAR ?
TERMINAL I . D.
CLEAR ?
SYSTEM DATA
CLEAR ?
AUTODIALER & DELAY
SET CLEAR ? Y/N
4 - 4 6
1
Press FUNCTION, then 7.
2
Press YES.
3
Press NO twice.
Y/N
4
Press YES to clear memory.
Y/N
If you press NO, the fax machine displays NEW TONER UNIT
? again.
5
P ress Y E S to clear all re c o rds of transmission and re c e p t i o n s .
Y/N
After clearing the selected memory, the machine returns to the
standby mode.
Each time you press Y E S to clear a message, the machine
displays ARE YOU SURE ? to confirm it. Press YES to clear the
memory shown in the display.
If you press NO, the fax machine displays the next menu.
6
P ress Y E S twice to clear your terminal identification
Y/N information. Your terminal ID number, name, and turnaround
poll code (if you have set) are all erased from the fax machine's
m e m o r y. After clearing memory selected, the machine re t u r n s
to the standby mode.
If you press NO, the fax machine displays the next menu.
7
Press YES twice to clear the system data you have selected. See
Y/N "Setting System Data" on page 2-8. The system data will be
restored to the default value.
If you press NO, the fax machine displays the next menu.
8
P ress Y E S twice to clear the Autodialer memory and the
delayed dial operations.
All the numbers currently registered to One-touch Dial, Speed
Dial, and Group Dial numbers will be erased from the fax
machine's memory. In addition, all the delayed time operations
you have reserved are also cancelled. After clearing the selected
memory, the machine returns to the standby mode.
You can clear all information registered in the fax
machine's memory.
SAMSUNG ELECTRONICS CO., LTD