Automatic Discard; Automatic Redial Interval; Automatic Redial Number - Samsung SF5500 Installation And Operation Manual

SET DISCARD SIZE
[ 00-33 ]>
SET RDIAL INTERVAL
[ 0-7 ]>
SET RDIAL
ATTEMPT[0-7]>
2 - 1 2
If the fax machine can not reduce the data to fit on one page with
the feature enabled, the data is divided and printed out in actual
size on two sheets or more if needed.
Press YES if you want to reduce the incoming page that may need
to be divided into two pages with only a few centimeters on the
second page.
P ress N O if you do not want to reduce the receiving document.
The overflowed date will be printed out on a second page.

Automatic Discard

When receiving or copying a document as long as or longer than a
standard letter size paper installed into your fax machine, you set
the fax machine to discard any excess image at the bottom of the
( 15 )
page to fit on a standard letter size page.
If the received page is outside the margin you set, it will be printed
on two sheets of paper at the actual size.
If the data is within the margin, and Auto Reduction is turned on,
it will be reduced to fit on the appropriate size paper (Discard does
not take place). If Auto Reduction is turned OFF or fails, the data
within the margin will be discarded.
If the margin is set to 00, a second blank sheet may be printed.
Enter the desired discard size, using the dial keypad, then press Y E S.

Automatic Redial Interval

Your fax machine can automatically redial a remote fax machine if
it does not answer the first call or if it was busy.
( 3 )
Enter the number of minutes (from 0 to 7 minutes), using the dial
keypad, to wait before redialing the number that was busy on the
last try. Then press YES.
Note : If you enter 0, the fax machine will not wait. redial the number
immediately following the preceding try.

Automatic Redial Number

1
Enter the number of attempts (from 0 to 7 times) to redial the
number before giving up. Then press YES.
(3)
Note : If you enter 0, the fax machine will not redial at all
SAMSUNG ELECTRONICS CO., LTD