Confirming A Transmission; Confirmation Report - Samsung SF5500 Installation And Operation Manual

MESSAGE CONFIRM.
REPORT ?
3 - 8
CONFIRMING THE TRANSMISSION
An ending tone sounds when the transmission is completed and
the date and time reappears in the LCD display.
If your document is not sent successfully, CDMM ERROR appears
in the display. Press S T O P to clear the error message, and try to
send the document again.
Note : If a document has jammed, see "Clearing a Document Jam" on
page 5-1.

Confirmation Report

You can confirm the transmission result with a Confirmation
report. This tells you whether the transmission was successful or
not, how many pages were sent, etc.
If you have set up your fax machine not to print the report (see
"Setting System Data" on page 2-8) and you want to print the
report manually, use the COPY key. Follow the procedure below:
1
Press COPY when you finish sending.
Note : Make sure no document is loaded in the document feeder. If
t h e re is a document in the fax machine, the fax machine goes to
"copy" mode when you press COPY.
2
Press YES.
Y/N
The fax machine prints your last transmission result. If you
press NO, the fax machine prompts you to print other reports.
Select a desired report by pressing YES or NO.
Note : In case there is no record of the last transmission (due to a power
f a i l u re, for example), the MESSAGE CONFIRMATION REPORT ?
message does not appear when you press COPY. The fax machine directly
switches to the other reports printout mode. See °Reports°±
SAMSUNG ELECTRONICS CO., LTD
on page 4-39.