Initial Setup; Setting Date And Time - Samsung SF5500 Installation And Operation Manual

INITIAL SETUP

SET TIME, ID, or
SYSTEM DATA ?
SET DATE & TIME ?
SAMSUNG ELECTRONICS CO., LTD
H e re are a few points to remember about using the setup
procedures in this manual with your facsimile.
• P ro c e d u res are arranged with the displayed message on the
left of the page and your action or an explanation on the
right.
• Your fax machine has been designed to take you smoothly
t h rough all pr o c e d u res step by step, by responding with
messages to your setting or asking you questions to prompt
you to the next step.
• The NO key has two basic functions:
- Giving a negative response to a prompt from your fax
machine and either skipping on to the next prompt or
returning to the previous one.
Making corrections to mis-entries if the entry is still displayed
in the LCD window and if you have not pressed YES to
actually register the entry. If the entry has been re g i s t e red in
the fax machine by pressing YES, press STOP then start over
again.

SETTING DATE AND TIME

The current date and time are shown in the display when the
machine is ready for operation (standby mode). The date and time
is also printed on documents you send. To set the correct date and
time, perform the following steps:
1
Press FUNCTION, then 0
2
Press YES.
Y/N
3
Press YES.
Y/N
2 - 3