Table 080-21: Service Programming Mode Summary, G 2120/G 2140/G 2150; Table 080-22: Water Hardness Settings, G 2120/G 2140/G 2150 - Miele G 1 Series Technical Information

G 1xxx/G 2xxx
Function
Activating/deactivating
improved drying
Appliance height setting
Model setting
Country setting

Table 080-21: Service Programming Mode Summary, G 2120/G 2140/G 2150

1
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
2
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Water Hardness [°d]
8 – 11
12 – 15
16 – 20
21 – 25
26 – 30
31 – 36
37 – 50
51 – 70

Table 080-22: Water Hardness Settings, G 2120/G 2140/G 2150

1
Standard setting.
Programming
Press the Program
button 27x. Press the
Start/Stop button as
appropriate to make the
desired setting.
Press the Program
button 36x. Press the
1
Start/Stop button as
appropriate to make the
desired setting.
Press the Program
button 38x. Press the
1
Start/Stop button as
appropriate to make the
desired setting.
Press the Program
button 39x. Press the
1
Start/Stop button as
appropriate to make the
desired setting.
Water Hardness [gpg]
1 – 4
5 – 7
189
Display
The "Rinse & Hold" LED flashes
2x slowly and 7x rapidly. "Rinse"
LED is off: Standard setting; "Rinse"
LED flashes: Improved drying –
depending on the program, drying
time is extended and the final rinse
temperature increased.
The "Rinse & Hold" LED flashes 3x
slowly and 6x rapidly. "Rinse" LED
is off: Standard appliance height
(G 1xxx); "Rinse" LED flashes: XXL
models (G 2xxx).
The "Rinse & Hold" LED flashes 3x
slowly and 8x rapidly. "Rinse" LED
off: Models without drying fan;
"Rinse" LED flashes: Models with
UTT version 1 or 2.
The "Rinse & Hold" LED flashes 3x
slowly and 9x rapidly. The "Rinse"
LED's flash pattern indicates which
country is set: 1x: Europe; 2x:
Australia; 3x: USA; 4x: Japan; 5x:
Italy/Spain; 6x: Southern Europe.
Flash Pattern of "Rinse"
1.1 – 4.3
5.4 – 7.5
8.6 – 11.8
12.8 – 16.1
17.1 – 21.4
22.5 – 26.8
27.8 – 32.1
33.2 – 38.5
39.6 – 53.5
54.6 – 74.9
Technical Information
2
LED
1x rapidly
2x rapidly
3x rapidly
1
4x rapidly
5x rapidly
6x rapidly
7x rapidly
8x rapidly
9x rapidly
1x slowly