Inspira And Diamante - G 2142/G 2143; Table 080-23: Rinse Aid Quantities, G 2120/G 2140/G 2150 - Miele G 1 Series Technical Information

Technical Information
Rinse Aid Volume [mL]

Table 080-23: Rinse Aid Quantities, G 2120/G 2140/G 2150

1
One milliliter equals 0.3 fluid ounces.
2
Standard setting.
4.2.8

Inspira and Diamante - G 2142/G 2143

Initial requirements:
1. Close the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
3. Release the Start/Stop button.
4. Immediately press the Start/Stop button 5 times; on the 5th time, hold
until the "Start/Stop" LED flashes.
5. Release the Start/Stop button.
6. If the "Start/Stop" LED does not light up, repeat the procedure.
Acknowledgement indicator:
The "Start/Stop" LED flashes rapidly (5 flashes per second).
Options:
Function
Reset
Water hardness setting
1
Flash Pattern of "Rinse" LED
0
1
2
3
4
5
6
Programming
Press the Program (or
Delay Start for G 2143)
button 1x. Press the
Start/Stop button to reset
all standard settings.
Press the Program (or
Delay Start for G 2143)
button 2x. Press the
Start/Stop button as
appropriate to set the
desired water hardness.
190
G 1xxx/G 2xxx
—
1x rapidly
2x rapidly
2
3x rapidly
4x rapidly
5x rapidly
6x rapidly
Display
The "Rinse & Hold" LED flashes 1x
rapidly. "Rinse" LED is off: values
do not correspond to standard
settings; "Rinse" LED flashes:
values correspond to standard
settings.
The "Rinse & Hold" LED flashes 2x
rapidly. If the "Rinse" LED flashes
4x rapidly at intervals, this corres-
ponds to standard settings. Range:
1 - 70°d. See Table 080-25.
2