Optima - G 2420/G 243X; Table 080-26: Rinse Aid Quantities, G 2142/G 2143 - Miele G 1 Series Technical Information

G 1xxx/G 2xxx
Rinse Aid Volume [mL]

Table 080-26: Rinse Aid Quantities, G 2142/G 2143

1
One milliliter equals 30 fluid ounces.
2
Standard setting.
4.2.9

Optima - G 2420/G 243x

Initial requirements:
1. Close the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
3. Release the Start/Stop button.
4. Immediately press the Start/Stop button 5 times; on the 5th time, hold
until the "Start/Stop" LED flashes.
5. Release the Start/Stop button.
6. If the "Start/Stop" LED does not light up, repeat the procedure.
Acknowledgement indicator:
The "Start/Stop" LED flashes rapidly (5 flashes per second).
Options:
Function
Software version ID check
Reset
1
Flash Pattern of "Rinse" LED
0
1
2
3
4
5
6
Programming
Do not press the Delay
Start button. The "Delay
Start" LED is off.
Press the Delay Start
button once. The "Delay
Start" LED flashes once
quickly intermittently.
Press the Start/Stop
button to reset all standard
settings.
193
Technical Information
—
1x rapidly
2x rapidly
2
3x rapidly
4x rapidly
5x rapidly
6x rapidly
Display
"Rinse" LED is out or flashes. The
display shows the software version
ID no. in consecutive digits
(e.g., -818).
The "Rinse" LED is out or flashes.
This programmable function can be
used to reset all modifiable
parameters to their standard
settings. The display shows p and a
digit alternately: p0 = Non-standard
settings have been made; p1 = All
settings reset to standard settings
or no modifications have been
made.