Programming After Replacing The Electronic; Electronic Modes; Programming Mode; Table 4-11: Activation Of Components - Miele G 600 Series Technical Information

Technical Information
Component Part
Circulation pump M6
Drain pump M8
Heater relay 1K/1 solenoid
Power supply relay 1K/6 solenoid
WaterProof System solenoid valves
Reactivation solenoid valve
Detergent dispenser Y51 solenoid
Rinse aid dispenser Y50 solenoid

Table 4-11: Activation of Components

4.25.1

Programming after Replacing the Electronic

In addition to intake duration and water softener settings, certain dishwasher
electronics need to be programmed for dishwasher width (45cm or 60cm).
For further details, refer to the model-specific programming and service mode
information.
4.25.2

Electronic Modes

The electronic modes are divided into 3 levels:

Programming mode

Service mode 1
Service mode 2
Programming mode is intended for user access. Service modes 1 and 2 are
designed to be accessed only by qualified service personnel.
Note:
While in service or programming mode, if the dishwasher is switched off or the door
is opened, the dishwasher will automatically exit the current mode and return to
normal operating mode.
Activation
Relay
Relay
Thyristor
Via switch S2 (EWZ 548)
Thyristor
Thyristor
Thyristor
Thyristor
46
G 600/G 800