Dealer Demo Mode (Excella/Laperla); Electronics Id Summary - Miele G 1 Series Technical Information

Technical Information
opened at any time.
Note:
The customer can deactivate the Drying plus function in the Settings menu.
Drying plus is inoperative in the following programs:
Rinse & Hold
Express
Glassware cold
Glassware warm
2.8

Dealer Demo Mode (Excella/LaPerla)

The appliance is equipped with three or five different demo programs
(depending on model) for the dealer.
The operation and functions of the appliance are demonstrated in the Demo
mode and Continuous demo mode programs. These show the operating
structure by means of some examples. They show, among other things, how
wash programs are selected, how related background information is accessed,
how Extras are programmed and how the timer function is set. With the Demo
program, initial commissioning in the display can be suppressed.
(Continuous demo available on select models only.)
In the Demo wash sound program, the circulation pump is activated to
demonstrate the wash noise. If there is water in the machine, the circulation
pump runs until the program is interrupted. If there is no water in the
machine, the circulation pump is switched off again immediately after
activation. Also, the spray arm alternation function is demonstrated - first the
middle spray arm and then the top and bottom spray arms are supplied
alternately with water.
With the Drying plus demo program, the door is automatically opened in
order to demonstrate the Drying plus function. (LaPerla II models only.)
For demo program selection, see Section 080-4.2.13.
2.9

Electronics ID Summary

ID Number
-769
-818
-876
-879
-962
-984
-1080
Modification
Pre-production.
Start of series.
st
1 series modification.
Start of series.
Start of series.
Start of series.
nd
2 series modification.
st
1 series modification.
rd
3 series modification.
132
Date Models (and Modules) Affected
G 1470, G 2470
--
G 1470, G 2470, G 2420, G 2430
--
G 1470, G 2470, G 2420, G 2430
--
-- G 2670, G 2830 (SLT
-- G 1180, G 2170, G 2180
--
G 1182, G 2182, G 2183, G 2142
G 1470, G 2470, G 2420, G 2430
--
G 2670, G 2830 (SLT
--
2170, G 2180
G 1470, G 2470, G 2420, G 2430
G 1xxx/G 2xxx
1
)
1
), G 1180, G