Installation; Before You Begin - Motorola Wireless Cable Modem Gateway SBG1000 User Manual

Overview Installation Troubleshooting Contact

Installation

The following subsections provide information about installing the SBG1000 hardware:
•

Before You Begin

•
Precautions
•
Signing Up for Service
•
Computer System Requirements
•
Connecting the SBG1000 to the Cable System
•
Cabling the LAN
•
Obtaining an IP Address for Ethernet
•
Connecting a PC to the USB Port
•
Connecting the Printer
•
Wall Mounting
•
Installing the Optional External Diversity Antenna
For information about wireless LAN setup, see
Before You Begin
Before you begin the installation, check that you received the following items with your SBG1000:
Item
Power cord
10/100Base-T
Ethernet cable
USB cable
Phone wire jumper with
RJ-11 connectors
SBG1000 Installation
CD-ROM
You will need 75-ohm coaxial cable
a TV is connected to the cable outlet, you may need a 5 to 900 MHz RF
to use both the TV and the SBG1000.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
"Setting Up the Wireless
Description
Connects the SBG1000 to the AC electrical outlet
Connects to the
Connects to the
Connects to a telephone line used for the
Contains this User Guide and
with F-type connectors to connect the SBG1000 to the nearest cable outlet. If
X
20
Exit
FAQ Specifications Glossary License
LAN".
Ethernet port
USB port
HPNA
USB drivers
splitter and two additional coaxial cables
SBG1000 User Guide
network