Setting Up The Wireless Lan - Motorola Wireless Cable Modem Gateway SBG1000 User Manual

Overview Installation Troubleshooting Contact

Setting Up the Wireless LAN

You can use the SBG1000 as an access point for a wireless LAN without changing its default settings.
Caution!
The default SBG1000 settings provide no security for wireless data. After the wireless LAN is
operational, be sure to enable wireless security.
To enable security for your SBG1000 wireless LAN, you can do the following on the SBG1000:
To
Configure an Extended
Service Set Identifier (ESSID)
and enable closed network
operation
Enable Wired Equivalent
Privacy (WEP) encryption
and configure a WEP key
Restrict access to computers
with known MAC addresses
Connect at least one computer to the SBG1000 Ethernet or USB port to use for performing configuration. Do not
attempt to configure the SBG1000 over a wireless connection.
You need to configure each wireless client station to access the SBG1000 LAN as described in
Wireless Clients".
Caution!
Never provide the ESSID or WEP key to anyone who is not authorized to use your wireless LAN.
For descriptions of all wireless configuration fields, see
Another common-sense step to improve wireless security is to place wireless components away from windows.
This decreases the signal strength outside the intended area.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Perform on the
SBG1000
Configuring the Wireless
Network Name on the
SBG1000
Configuring WEP on the
SBG1000
Configuring a MAC
Access Control List on
the SBG1000
X
71
Exit
FAQ Specifications Glossary License
Advantages
Provides a unique name to
distinguish from other
nearby wireless LANs
Encrypts wireless data
No configuration on client
required
No code that can be broken
"Wireless Pages in the SBG1000 Setup
SBG1000 User Guide
Disadvantages
You must configure the ESSID
on each client computer
Does not encrypt wireless data
You must configure the WEP key
on each client computer
You must input each client MAC
address on the SBG1000
Does not encrypt wireless data
"Configuring the
Program".