Gateway > Lan - Nat Config Page - Motorola Wireless Cable Modem Gateway SBG1000 User Manual

Overview Installation Troubleshooting Contact
Gateway > LAN — nat config Page
Use this page to enable
Gateway > LAN — nat config page fields
Field or Button
LAN
Enable NAT
Apply
NEW NAT
PASSTHROUGH
MAC Address
Bypass Firewall
(True DMZ)
Add
CURRENT NAT
PASSTHROUGH
Delete
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
NAT and add clients to the CURRENT NAT PASSTHROUGH list:
Description
If enabled, the single HFC IP Address (public IP address) assigned by the cable provider is
mapped to many private IP addresses on the
Click to apply your changes. You must reboot the SBG1000.
Specifies up to 32 computers as passthrough clients not subject to NAT, using their MAC
addresses.
Type the passthrough client MAC address. The format is 16 hexadecimal numerals.
Check this box to set the NAT passthrough computer as a DMZ client. Use this setting with
extreme caution because a DMZ client is completely open to Internet hackers.
Click to add the MAC address to the CURRENT NAT PASSTHROUGH list.
Lists the computers on the LAN that are configured for NAT passthrough.
Click to delete the selected MAC address from the NAT passthrough list.
X
48
Exit
FAQ Specifications Glossary License
SBG1000
LAN.
SBG1000 User Guide