Advertisement
Preparing for Installation
Preparing for Installation
Introduction
Local
Requirements
Computer or
Workstation
Requirements
1-4
This section describes how to prepare for AL 200 installation.
Before installation, ensure that:
• Your cable service includes broadband Internet access
• The service is functioning properly
• The coaxial cable is installed and active in the room where the AL 200 is
located
• The site chosen for the AL 200 installation is within an appropriate distance
of a power source and that the site is free of accumulated dust and environ-
mental extremes
Before installation, decide which computer(s) to connect to the network and
determine the type of adapter to use for each computer. The next section provides
further information.
Each computer or workstation must have hardware and software to establish a
connection with the AL 200.
Verify that the components listed in this section for the computer's network
connection type are installed. The network connection types are:
• RF/USB
• RF/PCMCIA
• Ethernet
The Motorola AL 200 Multi-User Modem
Advertisement
