Motorola Wireless Cable Modem Gateway SBG1000 User Manual page 43

Overview Installation Troubleshooting Contact
5
Click Apply to apply your changes.
After you edit some fields and click Apply, you are warned that you must reboot for your change to take effect.
Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.
If you have the need, you can:
•
View the rules for the High, Medium, or Low predefined policy templates or create a custom policy on the
Firewall > POLICY — advanced Page
•
Configure a firewall alert on
•
View the firewall logs on the
For information about how the firewall can affect gaming, see
The predefined policies provide outbound Internet access for computers on the SBG1000 LAN. The SBG1000
firewall uses stateful inspection
corresponding to the data flow. For example, if you use a web browser, outbound HTTP connections are permitted
on port 80. Inbound responses from the Internet are allowed because an outbound session is established.
When required, you can configure the SBG1000 firewall to allow inbound packets without first establishing an
outbound session. You also need to configure a port forwarding entry on the
config Page or a DMZ client on the
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Firewall > ALERT — basic Page
Firewall > LOGS — config Page
to allow inbound responses when there already is an outbound session running
Gateway > LAN — nat config
X
37
Exit
FAQ Specifications Glossary License
and Firewall > ALERT — email Page
"Gaming Configuration Guidelines".
Gateway > PORT FORWARDING —
Page.
SBG1000 User Guide