Configuring The Wireless Network Name On The Sbg1000 - Motorola Wireless Cable Modem Gateway SBG1000 User Manual

Overview Installation Troubleshooting Contact

Configuring the Wireless Network Name on the SBG1000

If you enable Closed Network on the SBG1000
same network name (ESSID) on all wireless LAN
authorized to use your wireless LAN.
To configure the ESSID:
1
Start the SBG1000 Setup Program as described in
2
On the left frame, click Wireless.
3
Click the NETWORK tab to display:
4
In the ESSID field, type a unique name. It can be any alphanumeric, case-sensitive string up to
32 characters. The default is "Motorola." Do not use the default ESSID.
5
Click Save Changes to save your changes.
6
To restrict wireless LAN access to clients configured with the same Network Name (ESSID) as the SBG1000,
click the SECURITY tab.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Wireless > SECURITY — advanced
clients
X
72
Exit
FAQ Specifications Glossary License
(stations). Never provide the ESSID to anyone who is not
"Starting the SBG1000 Setup
SBG1000 User Guide
Page, you must configure the
Program".