This chapter provides information on mechanical and electrical
installation of the modem.
Electrical Installation
The rear panel (Figure 2-1) includes DTE cable and telephone line
connectors.
TELSET
LEASED LINE
DIAL
Figure 2-1. Rear Panel Connections (115 Vac Model)
AC Power Connection
Power is supplied through a 6-foot line cord with a grounded 3-wire plug.
DC Power Connection
Caution
To protect
the positive and negative leads are properly connected.
If the modem is equipped for 12-60 VDC power input, connect the power
to the terminal block attached to the modem back panel. A chassis ground
connection is also supplied on the terminal block.
t
he DC-to-DC converter from damage, ensure
V.3600
Chapter 2
Installation
2-1