About Front Riggings; Raising/Lowering Elevating Front Riggings - Invacare ASBA User Manual

Adjustable seats
Hide thumbs Also See for ASBA:
Table of Contents

Advertisement

The joystick is factory installed on the right side of the
wheelchair. To reposition the joystick onto the left side of
the wheelchair, refer to Repositioning the Joystick in the
wheelchair base user manual.
1.
Turn the adjustment lock lever A to release the adjustment lock
from joystick mounting tube B.
2.
Slide joystick mounting tube to the desired position.
3.
Turn the adjustment lock lever to secure the adjustment lock
to the joystick mounting tube.

6.3 About Front Riggings

WARNING!
Risk of Serious Injury or Damage
Operating the wheelchair with a ground clearance of
less than 75 mm (3 inches) between the footplates and
the ground/floor may cause serious injury or property
damage.
– ALWAYS maintain a minimum of 75 mm (3
inches) between the bottom of the footplates and
ground/floor to ensure proper ground clearance while
the wheelchair is in motion. If necessary, adjust the
footplates height to achieve proper ground clearance.
After footplates height adjustment, if the wheelchair
dips forward and the footplates touch the ground
while in motion, please contact your dealer for an
inspection and avoid use of the wheelchair if possible.
If the wheelchair is not moving, the front rigging must
maintain a minimum of one inch ground clearance -
otherwise personal injury and damage may result.
1143192-L-03
WARNING!
– PINCH POINT EXISTS BETWEEN CENTER MOUNT
FOOTREST AND CASTERS - There is limited
clearance between center mount footrest and casters.
The user's feet MUST remain on the center mount
footrest while operating the wheelchair. If the user's
feet are allowed to rest off the side of the center
mount footrest they may come in contact with the
caster possibly resulting in injury.

6.4 Raising/Lowering Elevating Front Riggings

1.
Perform one of the following:
Raising - Pull back on the release lever A and raise front
rigging to the desired height.
Lowering - Support front rigging with one hand away from
the release lever. Push release lever downward with other
hand.
Usage
29

Advertisement

Table of Contents
loading

Table of Contents