Procedure with door mounting kit IP65
• Remove the protective film from the adhesive tape on the seal and secure the seal on the rear
side of the 3RW5 HMI High Feature
Ensure that the seal does not overlap.
• Place the 3RW5 HMI High Feature into the cutout of the control cabinet door
SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
4.5 Installing / mounting / removing 3RW5 HMI
①
.
Mounting and Dismantling
②
.
47