Parameterizing The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW51 Equipment Manual

Micro SD card
This menu is only displayed if a micro SD card is inserted.
Menu
Uploading / downloading of communica‐
tion and HMI parameters on memory
card
Device change
Save logbooks to micro SD card
FW update
Memory space
For more information, see Chapter:
• Micro SD card (Page 125)
8.12.5

Parameterizing the 3RW5 HMI High Feature

Requirements
• Access protection to 3RW5 HMI High Feature is not active or has been reset
• You are in menu "Parameters > HMI".
Procedure
Select a parameter.
The menus "Response after Logoff" and "Message Display" and "Status Display" contain further
menu items, which you can switch to with "OK".
Parameters
Timer Lighting Dark
Do Control after logoff
SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
Content
-
• Back up the configuration data on the micro SD card
• Transfer configuration data to soft starter
-
This menu item is only displayed if a valid FW file is stored on
the micro SD card.
• Complete memory
• Free memory
• Used memory
Setting range
• 5 min (factory setting)
• Setting range: 0 ... 60 min
• 0 min = deactivated
Continue with motor control (factory
setting)
Stop motor and give back control
8.12 3RW5 HMI High Feature
Explanation
If no key is pressed on the 3RW5 HMI
High Feature, the brightness of the
background lighting switches off after a
specified time has elapsed.
3RW5 HMI High Feature is still the mas‐
ter control.
The motor stops and 3RW5 HMI High
Feature is no longer the master control.
Functions
121