Removing 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW51 Equipment Manual

Mounting and Dismantling
4.5 Installing / mounting / removing 3RW5 HMI
• Observe the coding of the plug and socket
• Lock the connector in the socket
• Observe the cable routing:
①
③
• Replace the hinged cover of the 3RW51 soft starter as required (Page 53).
Result
You have installed the 3RW5 HMI High Feature in the 3RW51 soft starter and can commission it
(Page 86).
4.5.4

Removing 3RW5 HMI High Feature

Requirements
• Installed 3RW5 HMI High Feature (accessory) (Page 39)
• Flat-bladed screwdriver
Procedure
NOTICE
Damage to the sealing surfaces.
Make sure that the sealing surfaces are not damaged by the screwdriver.
40
Cable routing to the right
Cable routing to the left
① ③
/ .
②
.
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
SIRIUS 3RW51 Soft Starter