Mazda CX-9 2021 Manual page 468

Interior Features
Climate Control System
Fan control switch
The fan has five speeds. The selected
speed will be displayed.
Mode selector switch
The desired airflow mode can be selected.
Refer to Selecting the Airflow Mode on
page 5-10.
▼ Operation of Automatic Air
Conditioner
Operation from front seats
1. Turn the front air conditioner on.
2. Press the rear switch. The rear air
conditioner operates.
3. Selection of the airflow mode, airflow
amount and temperature will be
automatically controlled to the same
temperature setting as the front air
conditioner for the driver's side.
NOTE
Set the control dial to the

recommended temperature of 22 °C
(72 °F), and then adjust it as
desired.
If the AUTO switch is pressed while

the front A/C switch is off, the rear
air conditioner operates only to
circulate air.
Setting the temperature to the

maximum high or low will not
provide the desired temperature at a
faster rate.
When selecting heat, the system will

restrict airflow until it has warmed
to prevent cold air from blowing out
of the vents.
5-12
When the rear air conditioner is

controlled to the same temperature
setting as the front air conditioner
for the driver's side, "SYNC" is
displayed on the rear screen.
When operating the fan switch of the

front air conditioner while the rear
air conditioner is operating
automatically, the airflow amount of
the rear air conditioner may change.
Operation from rear seats
1. Turn the front air conditioner on.
2. Press the AUTO switch. The selection
of the airflow mode and airflow
amount will be automatically
controlled.
3. Use the temperature control switch to
set the desired temperature.
NOTE
Set the control switch to the

recommended temperature of 22 °C
(72 °F), and then adjust it as
desired.
If the AUTO switch is pressed while

the front A/C switch is off, the rear
air conditioner operates only to
circulate air.
Setting the temperature to the

maximum high or low will not
provide the desired temperature at a
faster rate.
When selecting heat, the system will

restrict airflow until it has warmed
to prevent cold air from blowing out
of the vents.
When the rear air conditioner is

operated automatically, "AUTO" is
displayed on the rear screen.