Mazda CX-9 2021 Manual page 209

*
1 The light turns on when the ignition is switched on for an operation check, and turns off
a few seconds later or when the engine is started. If the light does not turn on or remains
turned on, have the vehicle inspected at an Authorized Mazda Dealer.
▼ Wrench Indicator Light
The wrench indication is displayed under
the following conditions.
When the preset maintenance period has

arrived.
Refer to the Information section in the
Mazda Connect Owner's Manual.
When the engine oil replacement period

has arrived.
NOTE
The wrench indication may display

earlier than the preset period depending
on vehicle usage conditions.
Whenever the engine oil is replaced, a

reset of the vehicle engine control unit is
necessary.
Refer to the Information section in the
Mazda Connect Owner's Manual.
▼ Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
Instrument Cluster and Display
When Driving
4-43