Mazda CX-9 2021 Manual page 331

NOTE
The LAS & LDWS remains on stand-by

until it detects white (yellow) lines on
both the left and right sides, or on either
side.
When the system detects a white

(yellow) lane line on one side only, the
system will not activate warnings for the
lane line on the side that is not being
detected.
The distance and warning sensitivity

(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
(Mazda Connect (Type A) only)
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Vehicle lane line display
When the LAS & LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display. The system
changes to operational status display when
the system detects a white (yellow) line on
either the left or right.
(Stand-by status)
(Operational status)
i-ACTIVSENSE
Auto cancel
In the following cases, the LAS & LDWS
is automatically canceled, the LAS &
LDWS warning indication (amber) turns
on, and an alert is displayed. When the
LAS & LDWS become operational, the
system turns back on automatically.
The temperature inside the camera is

high or low.
The windshield around the camera is

foggy.
The windshield around the camera is

blocked by an obstruction, causing poor
forward visibility.
(Auto cancel of warnings)
When the following operations are
performed, the LAS & LDWS determines
that the driver intends to make a lane
change and the system operation is
canceled automatically. The LAS &
LDWS resumes automatically after the
operation.
The steering wheel is operated abruptly.

The brake pedal is depressed.

The accelerator pedal is depressed.

(To cancel the automatic sensitivity
cancel function, deselect "Warning
sensitivity" in the personalization
features setting.) (Mazda Connect (Type
A) only)
The turn signal lever is operated.

The vehicle crosses a lane line.

When Driving
4-165