Mazda CX-9 2021 Manual page 22

Essential Safety Equipment
Seats
Any of the seat adjustment switches is

operated.
The SET button is pressed.

Programming button 1 or 2 is pressed.

The key lock button or unlock button

is operated.
The vehicle starts moving.

The active driving display is adjusted.

(Using a programmed key)
1. Unlock the doors by pressing a request
switch or the key unlock button.
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
3. Make sure the parking brake is on.
4. Make sure the selector lever is in the P
position.
5. Start the engine.
6. The active driving display adjustment
begins.
NOTE
If there is no driving position movement,

a beep is not heard.
2-12
The driving position adjustment is

canceled in the following cases:
Any of the seat adjustment switches is

operated.
The SET button is pressed.

Programming button 1 or 2 is pressed.

The key lock button or unlock button

is operated.
The vehicle starts moving.

The active driving display is adjusted.

Erasing programmed driving positions
(Erasing the driving positions
programmed to the key)
1. Switch the ignition OFF.
2. Press the SET button on the side of the
seat until a beep sound is heard 1 time.
3. After the beep sounds, press the key
lock button within 5 seconds until a
beep sound is heard 1 time.
NOTE
If a beep sound is heard 3 times, the
operation is canceled.