Mazda CX-9 2021 Manual page 453

Parking Sensor System (Mazda Connect (Type B))
▼ Obstruction Detection Indication
The position of a sensor which has detected an obstruction is indicated. The gauge
illuminates in different areas depending on the distance to an obstruction detected by the
sensor.
As the vehicle approaches closer to an obstruction, the zone in the gauge closer to the
vehicle illuminates.
Without 360°view monitor
Left front corner
ultrasonic sensor gauge
Left rear corner
ultrasonic sensor gauge
With 360°view monitor
Left front corner
ultrasonic sensor gauge
Left rear corner
ultrasonic sensor gauge
NOTE
The detection indicator can be switched between display and non-display and the buzzer
volume can be changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.
(Vehicles with 360° View Monitor)
When the detection indicator is set to "Display", even with the 360° view monitor not
displayed, if a front ultrasonic sensor or a front corner ultrasonic sensor detects an
obstruction, the 360° view monitor switches automatically to display. When an obstruction
is no longer detected, the display switches to the display before the obstruction was
detected. However, while the 360° view monitor is displayed, it continues to display no
matter if an obstruction is detected or not.
Front sensor ultrasonic gauge
Right front corner
ultrasonic sensor gauge
Right rear corner
ultrasonic sensor gauge
Rear ultrasonic sensor gauge
Front ultrasonic sensor gauge
Right front corner
ultrasonic sensor gauge
Right rear corner
ultrasonic sensor gauge
Rear sensor ultrasonic gauge
When Driving
4-287