Accessories
13.6 DRIVE-CLiQ coupling
13.6
DRIVE-CLiQ coupling
13.6.1
Description
The DRIVE-CLiQ coupling is used to connect two DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
13.6.2
Safety Information
Note
Only Siemens cables should be used for DRIVE-CLiQ connections.
13.6.3
Interface description
13.6.3.1
Overview
Figure 13-14 DRIVE-CLiQ coupling
298
1
DRIVE-CLiQ coupling
2
Rating plate
3
Centering caps, Yamaichi, order no.: Y-ConAS-24-S
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4