Copying A Drum Kit (Kit Copy); Resetting A Drum Kit's Settings (Kit Reset) - Roland TD-07 Owner's Manual

Copying a Drum Kit (KIT COPY)

Here's how to copy the settings of a drum kit.
NOTE
When you execute a copy operation, the contents of the
copy-destination are overwritten.
1
Press the [ ] (KIT EDIT) button.
2
Use the [C][A] buttons to select "KIT COPY,"
and press [ ] (ENTER) button.
The KIT COPY screen appears.
KIT COPY
From Kit01À
3
Use the dial to select the copy-source drum kit.
4
Press the [A] button.
KIT COPY
ÄTo Kit03À
5
Use the dial to select the copy-destination
drum kit.
6
Press the [A] button.
KIT COPY [ENTER]
ÄKit01 Ã Kit03
7
Press the [ ] (ENTER) button.
A confirmation message appears.
Sure? CANCEL/OK
[EXIT] / [ENTER]
If you decide to cancel, press the [ ] (EXIT) button.
8
Press the [ ] (ENTER) button.
The drum kit is copied.
Customizing a Drum Kit (KIT EDIT)

Resetting a Drum Kit's Settings (KIT RESET)

Here's how to return the drum kit settings to their factory-
set state.
1
Press the [ ] (KIT EDIT) button.
2
Use the [C][A] buttons to select "KIT RESET,"
and press [ ] (ENTER) button.
The KIT RESET screen appears.
KIT RESET[ENTER]
01 TD-07
3
Use the dial to select the drum kit that you
want to reset.
4
Press the [ ] (ENTER) button.
A confirmation message appears.
Sure? CANCEL/OK
[EXIT] / [ENTER]
If you decide to cancel, press the [ ] (EXIT) button.
5
Press the [ ] (ENTER) button.
The drum kit returns to the factory settings.
17