Roland TD-07 Owner's Manual page 27

Troubles with USB
Is the USB cable connected correctly?
In order to transmit and receive audio as USB
AUDIO, the USB driver must be installed.
Can't communicate
with a computer
Are you using a cable that supports USB 2.0?
Have the settings for "Driver Mode" been
made correctly?
Troubles with MIDI
Is the MIDI channel set correctly?
No sound from an
external MIDI device
Has the note number been set properly?
Troubles with Bluetooth functionality
Troubles Items to check/Action
"TD-07" is not shown Could this unit's Bluetooth function be
on your smartphone "OFF"?
If your smartphone's Bluetooth device list
shows "TD-07 AUDIO"
Can't connect to
Bluetooth audio
If your smartphone's Bluetooth device list
does not show "TD-07 AUDIO"
For the Bluetooth MIDI function, you'll execute pairing not via the Bluetooth settings of your smartphone,
Can't connect to but by using the settings within your Bluetooth MIDI compatible app (such as GarageBand). Even if your
Bluetooth MIDI smartphone's Bluetooth device list shows "TD-07 MIDI, " do not tap it. If you tapped it by mistake, cancel
"TD-07 MIDI, " turn the Bluetooth function off and then on again, and make the connection again.
A paired smartphone If connection occurs but is immediately broken, turning the smartphone's Bluetooth function off and then
does not connect on again might make connection succeed.
If you are pairing with your smartphone
in a location where there are multiple TD-07
units, you can assign an ID to each unit.
Can't execute pairing
When you specify a Device ID, the specified
between a smartphone
number is added to the end of the device
and one of the TD-07 of
name that is shown on your smartphone.
multiple units
Example) "TD-07 AUDIO 1" "TD-07 MIDI 1"
etc.
Check the connections.
Install the USB driver on your computer.
The product cannot be used the cable that supports
USB 3.0. Use the cable that supports USB 2.0.
Choose the setting that's appropriate for your
situation.
Set the MIDI channels of the product and external
MIDI device to the same setting.
Set the pad's "MIDI NOTE NO. "
Turn this unit's Bluetooth function "ON. "
[ ] (Bluetooth)0[A] "ON/OFF"0dial (ON)
Bluetooth audio function:
When you initiate pairing ([ ] (ENTER) button), the device
name "TD-07 AUDIO" appears on your smartphone.
Bluetooth MIDI function:
[ ] (Bluetooth)0[A] "BT MIDI"0dial (ON)
Initiate pairing from the settings of your Bluetooth MIDI
compatible app (such as GarageBand).
In your smartphone's settings, temporarily remove the
registration of the "TD-07 AUDIO" Bluetooth device, turn the
Bluetooth function off and then on again, and execute pairing
once again.
In your smartphone's settings, turn the Bluetooth function off
and then on again, and then initiate pairing from the TD-07 to
pair it once again.
[ ] (Bluetooth)0[A] "BT ID"0dial (1–99)0[
* If you assign a Device ID, it takes effect when the TD-07
exits from the BLUETOOTH screen.
Troubleshooting
p. 18
p. 18
–
p. 24
p. 24
p. 16
Page
p. 11
p. 18
–
–
–
] (DRUM KIT)
–
27