Editing An Instrument's Sound (Inst Edit); Changing An Instrument's Pan; Changing An Instrument's Gain; Copying A Kit (Kit Copy) - Roland TR-8S Owner's Manual

Editing a Kit or Instrument
Editing an Instrument's Sound
1.
Hold down the [SHIFT]
button.
The INST Edit screen appears.
2.
Select a parameter.
2-1.
Use the [VALUE] knob to select a parameter.
2-2.
[ENTER]
Press the
3.
Modify values.
3-1.
[VALUE]
Use the knob to edit the parameter value.
3-2.
Press the [ENTER]
Return to the parameter selection (step 2).
4.
Press the [INST] button.
Exit the INST Edit screen.
& For details, refer to
"Reference Manual"

Changing an Instrument's Pan

1.
In the INST Edit screen, use the
select the "Pan" parameter.
2.
[ENTER]
Press the button.
3.
Use the [VALUE] knob to edit the parameter value.
Value: L127–CENTER–R127
4.
Press the [ENTER] button.
5.
Press the lit [INST] button.
Exit the INST Edit screen.

Changing an Instrument's Gain

1.
In the INST Edit screen, use the
select the "Gain" parameter.
2.
Press the [ENTER] button.
3.
Use the [VALUE] knob to edit the parameter value.
Value:
-INF, -40.0dB–0.0dB–+40.0dB
4.
Press the [ENTER] button.
5.
[INST]
Press the lit button.
Exit the INST Edit screen.
16
(INST Edit)
button and press the
button.
button.
(PDF).
[VALUE]
knob to
[VALUE] knob to
Copying a Kit
1.
[INST] Hold down the
button.
The KIT COPY screen appears.
2.
[VALUE]
Use the
and press the
3.
[VALUE]
Use the
destination, and press the
A confirmation message appears.
4.
To copy, use the
press the
If you decide to cancel, use the
and then press the

Using the LFO to Modify a Parameter

You can select a parameter that you want to modify, and use the LFO
to modify the parameter value.
1.
In the INST Edit screen, use the
select "LFO,"
2.
Use the [VALUE]
you want to modify, and press the
3.
Use the [VALUE]
then press the
4.
[VALUE]
Use the
change.
Value:
-128–0–+127
5.
Press the
6.
Press the lit
Exit the INST Edit screen.
MEMO
In the KIT Edit screen you can edit the LFO waveform
(Waveform), frequency (Rate), and tempo synchronization
(TempoSync).
LFO
KIT parameter
(Settings for the entire kit)
LFO Waveform
LFO Rate
LFO Tempo Sync
(KIT COPY)
[COPY] button and press the
knob to select the copy-source,
[ENTER] button.
knob to select the copy-
[ENTER]
[VALUE] knob to select
[ENTER] button.
[VALUE]
knob to select
[ENTER]
button.
[VALUE]
and press the [ENTER]
knob to select the parameter that
knob to select "LFO Depth,"
[ENTER] button.
knob to specify the depth of
[ENTER] button.
[INST] button.
INST parameter
(Settings for each instrument)
LFO
(Parameter to apply)
LFO Depth
[KIT]
button.
"OK," and
"Cancel,"
knob to
button.
[ENTER]
button.
and