4-11.
MIC Panel Block
4-11-1.
CN-3429 Board/CN-3427 Board
Preparation
1.
Remove the inside panel assembly. (Refer
2.
Remove the outside panel assembly. (Refer
Procedure
1.
Disconnect the coaxial cable from the connector (CN801) on the DPR-370 board.
DPR-370 board
2.
Disconnect the flexible flat cable from the connector (CN8) on the SY-408 board.
3.
Disconnect the two harnesses from the two connectors (CN10, CN12) on the SY-408 board.
SY-408 board
Harnesses
4.
Remove the five screws and pull out the MIC panel assembly.
5.
Disconnect the harness from the connector (CN2) on the CN-3432 board.
HDC4300
to"4-2. Inside Panel
to"4-3-1. Outside Panel
CN801
CN8
CN12
CN10
Assembly")
Assembly")
Coaxial cable
Flexible flat cable (36 core)
4-47