4-4.
FD (Filter Disk) Assembly
Preparation
1.
Remove the inside panel assembly. (Refer
Procedure
1.
Disconnect the harness from the connector (CN3) on the IF-1278 board.
2.
Loosen the two screws, and detach the FD assembly.
3.
Install the removed parts by reversing the steps of removal.
HDC4300
to"4-2. Inside Panel
CN3
IF-1278 board
Assembly")
FD assembly
Harness
Attached screws
(Tightening torque: 0.53 N•m)
4-16