Table of Contents
Advertisement
2.
Disconnect the harness from the connector (CN6) on the MB-1214 board, and release the harness from the two
clampers.
Harnesses
Clamper
Harness
MB-1214 board
Clamper
3.
Remove the four screws, and detach the hotshoe assembly.
HDC4300
CN6
Harness
Clamper
Hotshoe assembly
B3 x 8
B3 x 8
CN101
PS-836 board
Clamper
Harnesses
4-42
Advertisement
Table of Contents
