Table of Contents
Advertisement
4-5.
Front Assembly
Preparation
1.
Remove the inside panel assembly. (Refer
2.
Remove the outside panel assembly. (Refer
Procedure
1.
Disconnect the four fine-wire coaxial cables from the four connectors (CN200, CN201, CN202, CN300) on the
DPR-370 board.
DPR-370 board
CN202
CN201
CN200
Fine-wire coaxial cables
Note
When installing the front assembly, arrange the fine-wire coaxial cables as shown in the figure.
2.
Loosen the four screws with stopper, and draw the front assembly.
HDC4300
to"4-2. Inside Panel
to"4-3-1. Outside Panel
CN300
Assembly")
Assembly")
Hook
Grooves
Hook
Hooks
4-17
Advertisement
Table of Contents
