Table of Contents
Advertisement
With MSU (Master Setup Unit)
When the number button of the scene file you want to call is pressed and lit while the STORE button on the operation
panel is not lit, the scene file of the number is called. Repressing the number button cancels calling of the scene file and
the state before calling is restored.
Storing the Scene File to the USB Drive
Reference: Refer to step 3 of "Outline Figure of Operation".
Using PAINT Menu of This Unit
Stores the scene file stored in the camera to the USB drive.
[PAINT] → [SCENE FILE] → [WRITE (CAM → USB)]
Reading the Scene File from the USB Drive
Reference: Refer to step 4 of "Outline Figure of Operation".
Using PAINT Menu of This Unit
Reads the scene file stored in the USB drive to the camera.
[PAINT] → [SCENE FILE] → [READ (USB → CAM)]
Note
Scene File data stored in the USB drive cannot be read when the power is just turned on.
7-6
HDC4300
Advertisement
Table of Contents
