Change Your Password - ZyXEL Communications GS-3012F/3012 User Manual

Chapter 4 The Web Configurator
Table 5 Navigation Panel Links (continued)
LINK
IP Source Guard This link takes you to screens where you can configure filtering of unauthorized
Loop Guard
trTCM
IP Application
Static Routing
DHCP
Management
Maintenance
Access Control
Diagnostic
Syslog
Cluster
Management
MAC Table
ARP Table
Configure Clone

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management > Access Control > Logins to display the next screen.
54
DESCRIPTION
DHCP and ARP packets in your network.
This link takes you to a screen where you can configure protection against network
loops that occur on the edge of your network.
This link takes you to a screen where you can configure Two Rate Three Color
Marker settings.
This link takes you to a screen where you can configure static routes. A static route
defines how the Switch should forward traffic by configuring the TCP/IP parameters
manually.
This link takes you to screens where you can configure the DHCP settings.
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
This link takes you to a screen where you can view system logs and test port(s).
This link takes you to screens where you can setup system logs and a system log
server.
This link takes you to screens where you can configure clustering management and
view its status.
This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
This link takes you to a screen where you can copy attributes of one port to other
ports.
GS-3012/GS-3012F User's Guide