Figure 86 Advanced Application > Multicast > Multicast Setting > Mvr; Table 54 Advanced Application > Multicast > Multicast Setting > Mvr - ZyXEL Communications GS-3012F/3012 User Manual

Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 86 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 54 Advanced Application > Multicast > Multicast Setting > MVR
LABEL
Active
Name
Multicast VLAN
ID
802.1p Priority
Mode
Port
GS-3012/GS-3012F User's Guide
DESCRIPTION
Select this check box to enable MVR to allow one single multicast VLAN to be
shared among different subscriber VLANs on the network.
Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
Select a priority level (0-7) with which the Switch replaces the priority in outgoing
IGMP control packets (belonging to this multicast VLAN).
Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the multicast
VLAN.
Select Compatible to set the Switch not to send IGMP reports.
This field displays the port number on the Switch.
Chapter 21 Multicast
163