Wireless Lan Setup; Table 12-1 Menu 3.2 Tcp/Ip Setup - ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual

ZyAIR B-500 Wireless Access Point User's Guide
FIELD
IP Address Press [SPACE BAR] and then [ENTER] to select Dynamic to have the
Assignment ZyAIR obtain an IP address from a DHCP server. You must know the IP
address assigned to the ZyAIR (by the DHCP server) to access the
ZyAIR again.
Select Static to give the ZyAIR a fixed, unique IP address. Enter a
subnet mask appropriate to your network and the gateway IP address if
applicable.
IP Address Enter the (LAN) IP address of your ZyAIR in dotted decimal notation
IP Subnet Mask Your ZyAIR will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use
the subnet mask computed by the ZyAIR.
Gateway IP Type the IP address of the gateway. The gateway is an immediate
Address neighbor of your ZyAIR that will forward the packet to the destination. On
the LAN, the gateway must be a router on the same network segment as
your ZyAIR.
When you have completed this menu, press [
your configuration, or press [

12.3 Wireless LAN Setup

Use menu 3.5 to set up your ZyAIR as the wireless access point. To edit menu 3.5, enter 3 from the main
menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display
Menu 3.5 – Wireless LAN Setup as shown next.
12-2

Table 12-1 Menu 3.2 TCP/IP Setup

DESCRIPTION
ENTER
ESC
] at any time to cancel.
] at the prompt "Press ENTER to Confirm..." to save
EXAMPLE
192.168.1.2
255.255.255.0
LAN Setup