Chapter 7 Ip Screen; Factory Ethernet Defaults; Tcp/Ip Parameters; Ip Address And Subnet Mask - ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual

7.1

Factory Ethernet Defaults

The Ethernet parameters of the ZyAIR are preset in the factory with the following values:
•
IP address of 192.168.1.2
•
Subnet mask of 255.255.255.0 (24 bits)
These parameters should work for the majority of installations.
7.2

TCP/IP Parameters

7.2.1 IP Address and Subnet Mask

Refer to the section on IP address and subnet mask in the Wizard Setup chapter for this information.
7.3

Configuring IP

Click IP to display the screen shown next.
IP
ZyAIR B-500 Wireless Access Point User's Guide
This chapter discusses how to configure IP on the ZyAIR

Figure 7-1 IP Setup

Chapter 7
IP Screen
7-1